Planroom Options

Bidroom Homepage

Public Projects
Password Projects
Calendar

Log In
Version 6.0.6.1

 
 
   Information  
 
 
   Plan Holders  
 
 
   View Plans  
 
 
   Addenda  
 
 
   Spec Sheets  
 
REBID - Fulton County Airport, Use Acquire Airport Snow Removal Equipment (SRE)(14120)

This project shall consist of providing a single piece of Airport Snow Removal Equipment (SRE) capable of performing multi-tasking airport snow and ice removal operations from runways, taxiways and apron pavements at the Fulton County Airport (KUSE) in Wauseon, Ohio. The SRE shall meet Federal Aviation Administration (FAA) Advisory Circular (AC), 150/5220-20A (or current edition) equipment procurement requirements and shall include the general performance requirements of the specification document.
The SRE shall be a single, Multi-Tasking piece of Equipment (MTE) with the accessories and attachments as generally described in the specification document and below which will enable the MTE to perform light and heavy-duty snow and ice removal operations from general aviation airport runways, taxiways and apron pavements. As a minimum, the MTE shall include the following items and as further detailed in the specification document.

1. SRE Carrier Vehicle: The Carrier Vehicle may be new or used provided the carrier vehicle meets SAE ARP 5548 carrier vehicle specifications and is an FAA approved/waivered SRE. If used, the preferred manufacturer year of the carrier vehicle is between 2012 and 2014. The Carrier Vehicle chassis shall be a bi-directional, integral-articulating, enclosed cab, chassis or other (specify manufacturer) FAA approved equal. The chassis will only be considered if the chassis meets SAE ARP 5548.5.2 and meets Buy American Requirements as prescribed by the FAA and is on the FAA’s approved/waivered SRE list. The Owner reserves the right to inspect the used carrier vehicle prior to the acceptance of the bid. The bidder shall provide the carrier vehicle VIN for background research. The Carrier Vehicle engine gross horsepower shall be 6/6.7 Liter, 155 hp, 6 cylinders, turbo charged with air-to-air intercooler, diesel powered engine, or equal. The carrier vehicle engine will only be considered if the engine meets SAE ARP 5548.5.3 and meets Buy American Requirements as prescribed by the FAA and is on the FAA’s approved/waivered SRE list. PTO horsepower shall be a minimum of 105 HP at normal operating RPM. Other carrier vehicle requirements are specified in the specification document.
2. Front Mount Snowplow Blade: A new Snow Wolf Alpha Series, 12 ft. x 38-inch, engine end 3-point mount snow plow blade manufactured by Snow Wolf, U.S.A., or approved U.S.A. manufactured equal, meeting Buy American Requirements, on the FAA’s approved SRE list and meeting SAE ARP 5548.7. The front mount snowplow blade shall be installed on the front (engine end) of the carrier vehicle unit. Other snowplow blade requirements are specified in the specification document.
3. Cab End Push-Type Snow Blower: A heavy-duty cab end, push-type snow blower shall be provided and installed onto the cab end of carrier vehicle unit. The snow blower shall be a new Erskine Attachments, Inc. Model 1080 Rear-Mount Snow Blower or approved U.S.A. manufactured equal, meeting Buy American Requirements, on the FAA’s approved SRE list and meeting SAE ARP 5548. The snow blower shall be a PTO driven, 3-point, category 2 hitch mounted, two stage snow blower. Other snow blower requirements are specified in the specification document.
4. Carrier Vehicle/MTE Runway Broom: A removable carrier vehicle/MTE rotary broom shall be provided and installed onto the cab end of the carrier vehicle unit. The rotary broom shall be a new M-B companies, Inc., Model TKH-T or approved U.S.A. manufactured equal, meeting Buy American Requirements, on the FAA’s approved SRE list and meeting SAE ARP 5548.8. The broom shall be 11 ft. wide, cab end mounted, 3-point, category 2 hitch mounted, hydraulically driven rotary angle broom. The rotary brush core shall be comprised of refillable poly only (no wire) flat wafers. The rotary broom shall be capable to change angle of deflection to a minimum of 30 degrees left or right and be hydraulically controlled from inside the carrier vehicle cab. The rotary broom shall include a 16-inch, 360 degree center mounted caster wheel and site indicators at the broom ends. Other rotary broom requirements are specified in the specification document.
5. Air Band Transceiver Radio: A VHF air band transceiver shall be provided and installed in overhead console or dash mounted into the cab of the carrier vehicle unit. The VHF air band transceiver radio shall be a VAL Avionics, LTD model, COM 2000 VHF Transceiver as manufactured by VAL Avionics, LTD, 3280 25th Street SE, Salem, OR 97302, phone: 1-800-255-1511, website: www.valavionics.com (or approved U.S.A. manufacturer equal). The transceiver radio shall operate on the VHF air band frequency spectrum of 118.000 MHz to 137.975 MHz and shall include all of the necessary mounting hardware, accessories, etc., to provide an operating in cab VHF air band radio transceiver unit. Other air band transceiver radio requirements are specified in the specification document.

Measurement of the SRE shall be on a lump sum basis for a single MTE SRE unit with accessories and attachments, complete, as specified in the specification document. Payment for the SRE shall include furnishing, delivery, startup and on-site (one day) training of the above described MTE SRE; all O & M manuals; all testing and checkout procedures; one-year standard manufactures warranty on all new items; and all labor, tools, equipment and incidentals required to provide a complete piece of MTE SRE intended in the performance specification document.
            

 

    

Contact:   Cindy Chavez
PreBid Date:   N/A
PreBid Info:  

Company:   Delta Airport Consultants, Inc.
Bid Date:   12/04/2018 10:00 AM
Bid Info:   Commissioners Office, 152 S. Fulton St, Suite 270, Wauseon, OH 43567

Project Location: Neil Armstrong Airport, 7776 OH-219, New Knoxville, OH 45871 View a Map of this Location

Public Notes:
For information regarding this project please contact:

Cindy Chavez
Delta Airport Consultants, Inc.
20545 Center Ridge Road, Suite 450, Cleveland, Ohio 44116
Phone: 440-895-0465
Email: CChavez@deltaairport.com

OR

Mr. Jeff Rupp Fulton County Commisioner Wauseon,OH
Phone: 419-337-9255
Email: jrupp@fultoncountyoh.com

Bids must be accompanied by a certified check or a bid bond in the amount of not less than 5 percent of the total amount bid. A Contract Performance Bond and a Contract Payment Bond each equal to 100 percent of the Contract Price will be required for the successful Contractor. No bid may be withdrawn for a period of 30 calendar days after the date of receiving bids.



Job Purchase Information:
Bid Closed